Tricon Steel & Alloys stands as a premier manufacturer of IS 1239 Carbon Steel Pipes, meeting stringent industrial standards in Libya with precision and reliability. As reliable IS 1239 Carbon Steel Pipe Manufacturers in Libya, we can offer a wide range of pipes in different sizes, thicknesses, and dimensions. Our pipes in Libya conform to the IS 1239 standard and are available in a wide range of sizes and thicknesses to cater to diverse application needs. We offer MS IS 1239 B Class Seamless Pipes ranging from 4mm to 219mm outer diameter (OD) with wall thicknesses from 0.5mm to 20mm in Libya.
Our Pipes in Libya find extensive application across industries for their robust construction and reliable performance. These pipes in Libya are used in oil, gas, and fluid transmission pipelines, as well as in boilers and heat exchangers. As one of the most prominent IS 1239 Carbon Steel Seamless Pipes Suppliers in Libya, we ensure that each pipe meets the specific requirements of our clients.
Each pipe in Libya undergoes rigorous testing procedures to ensure adherence to international standards and customer specifications. We provide comprehensive material test certificates (MTC) as per EN 10204/3.1B and other required documentation in Libya. As one of the leading IS 1239 Carbon Steel Seamless Pipes Exporters in Libya, we prioritize reliability, durability, and performance, making us a trusted partner for industrial piping solutions.
Standard | AISI, DIN, EN, GB, IS, JIS, ASTM, ASME Pipe |
---|---|
MS IS 1239 B Class Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
IS 1239 YST 310 Welded Pipe Size | 5.0 mm – 1219.2 mm |
Carbon Steel IS 1239 YST 355 EFW Pipe size | 5.0 mm – 1219.2 mm |
IS 1239 grade YST 310 Tube Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
IS 1239 YST 240 Pipe Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
High-Alloy Steel IS 1239 Seamless Tube Size | 3.35 mm OD To 101.6 mm OD |
IS 1239 grade YST 310 Welded Tube Size | 6.35 mm OD To 152 mm OD |
IS 1239-97 Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
IS 1239 CS Tube wall thickness | 0.020" –0.220", (special wall thicknesses available) |
IS 1239 Mild Steel Length | Single Random, Double Random, Standard & Cut length Pipe & Tube |
Mild Steel IS 1239 Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
IS 1239 Carbon Steel Form | Round, Hydraulic, ‘U’ bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc |
IS 1239 YST 310 Type | Welded, Seamless, ERW, EFW, Fabricated Pipe, ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc |
Carbon IS1239 Grade C Steel End | Plain End, Beveled End, Treaded Pipe & Tube |
MS IS 1239 B Class Marking | All IS 1239 YST 210 / 240 / 310 Carbon Steel Pipes & Tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
Carbon IS 1239 steel Application | Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube |
Carbon Steel IS 1239 YST 355 Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
IS 1239 YST 210 Specialize in |
|
Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report, Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, Heat Treatment Charts, IS 1239 Carbon Steel Pipe HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP) |
Manufacturers of Carbon IS 1239 steel Pipe |
|
We can also cut, thread, and groove IS 1239 Mild Steel Pipe to meet your specifications. Pipe Dimension ANSI/ ASME B36.19, B36.10, B2.1 |
SPEC | OUT SIDE DIAMETER | WALL
THICKNESS |
WEIGHT | LENGTH | |||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PIPE BODY | PIPE END | ||||||||||||||||||||||||||||||||||||
IS:1239 & |
As per table | N.A. | Light – 8% + not limited Medium & Heavy – 10%,
|
Carload 10 MT Light +7.5%, -5%, M & H ± 7.5% Single Tube Light -8% + 10%Med & Heavy ± 10%Carload 10MT and above ± 7.5% |
Tolarance – Exact length – + 6, -0mm |
Chemical Composition (%) Max. |
Mechanical Properties |
Impact |
|||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Energy |
|||||||||||||||||||||
Specification | Grade | C | Mn | P | S | Si | C.E. | Yield Strength | Tensile Strength | % Elongation | |||||||||||
J (Ft.lb) |
|||||||||||||||||||||
PCM | IIW | Min | Max | Min |
Max |
||||||||||||||||
e (min) |
(min.) |
||||||||||||||||||||
PSI | MPa | PSI | MPa | PSI |
MPa |
PSI |
MPa |
||||||||||||||
IS:1239 |
0.20 |
1.30 |
0.040 |
0.040 |
|
|
|
|
|
|
|
|
320 |
|
|
12 UPTO 25 mm NB |
|
||||
20 ABOVE 25 mm | |||||||||||||||||||||
Fe 330 |
0.16 |
1.20 |
0.040 |
0.040 |
|
|
|
|
195 |
|
|
|
330 |
|
|
20 |
|
||||
Fe 410 |
0.20 |
1.30 |
0.040 |
0.040 |
|
|
0.45 |
|
235 |
|
|
|
410 |
|
|
18 |
|
||||
Fe 450 |
0.25 |
1.20 |
0.040 |
0.040 |
|
|
0.45 |
|
275 |
|
|
|
450 |
|
|
15 | |||||
GL= 5.65 | Area |
IS 1239 material specification & equivalent grades | ||||
---|---|---|---|---|
IS 1239 yst 355 | IS 1239 yst 355 | Tata Structura 355 | DIN: 2440, 2441, BS: 1387, S: 3589, 1239 | ISO: 65 |
IS 1239 Pipe Types | Out diameter | Wall thickness | Length |
---|---|---|---|
IS 1239 ERW Pipe (Custom Sizes) | 1/2″ NB – 24″ NB | As per requirement | Custom |
IS 1239 SAW Pipe | 16″ NB – 100″ NB | As per requirement | Custom |
IS 1239 Seamless Pipe (Custom Sizes) | 1/2″ NB – 60″ NB | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Custom |
IS 1239 Welded Pipe (in Stock + Custom Sizes) | 1/2″ NB – 24″ NB | As per requirement | Custom |
Size NPS | Pipe O.D. | Wall Thickness | Pipe I.D. | Weight per Foot | Standard to XXHY | Schedule Pipe # |
Section Modulus | Gallon Capacity Per Linear Foot |
---|---|---|---|---|---|---|---|---|
1/2 | 0.84 | 0.109 | 0.622 | 0.85 | STD | 40 | .0407 | .0158 |
0.147 | 0.546 | 1.09 | XHY | 80 | .0478 | .0122 | ||
0.188 | 0.464 | 1.31 | 160 | .0528 | .0088 | |||
0.294 | 0.252 | 1.72 | XXHY | .0577 | .0026 | |||
3/4 | 1.05 | 0.113 | 0.824 | 1.13 | STD | 40 | .0705 | .0277 |
0.154 | 0.742 | 1.48 | XHY | 80 | .0853 | .0225 | ||
0.219 | 0.612 | 1.95 | 160 | .1006 | .0153 | |||
0.308 | 0.434 | 2.44 | XXHY | .1103 | .0077 | |||
1 | 1.315 | 0.133 | 1.049 | 1.68 | STD | 40 | .1328 | .0449 |
0.179 | 0.957 | 2.17 | XHY | 80 | .1606 | .0374 | ||
0.250 | 0.815 | 2.85 | 160 | .1904 | .0271 | |||
0.358 | 0.599 | 3.66 | XXHY | .2136 | .0146 | |||
1 1/4 | 1.66 | 0.140 | 1.380 | 2.27 | STD | 40 | .2346 | .0777 |
0.191 | 1.278 | 3.00 | XHY | 80 | .2913 | .0666 | ||
0.250 | 1.160 | 3.77 | 160 | .3421 | .0549 | |||
0.382 | 0.896 | 5.22 | .4110 | .0328 | ||||
1 1/2 | 1.90 | 0.145 | 1.610 | 2.72 | STD | 40 | .3262 | .1058 |
0.200 | 1.500 | 3.63 | XHY | 80 | .4118 | .0918 | ||
0.281 | 1.338 | 4.86 | 160 | .5079 | .0730 | |||
0.400 | 1.100 | 6.41 | .5977 | .0494 | ||||
2 | 2.375 | 0.109 | 2.157 | 2.64 | 10 | .4205 | .1898 | |
0.154 | 2.067 | 3.66 | STD | 40 | .5606 | .1743 | ||
0.218 | 1.939 | 5.03 | XHY | 80 | .7309 | .1534 | ||
0.250 | 1.875 | 5.68 | .8045 | .1434 | ||||
0.281 | 1.813 | 6.29 | .8666 | .1344 | ||||
0.344 | 1.687 | 7.47 | 160 | .9806 | .1161 | |||
0.436 | 1.503 | 9.04 | XXHY | 1.1043 | .0922 | |||
2 1/2 | 2.875 | 0.120 | 2.635 | 3.53 | 10 | .6870 | .2833 | |
0.203 | 2.469 | 5.80 | STD. | 40 | 1.0640 | .2487 | ||
0.216 | 2.443 | 6.14 | 1.1169 | .2435 | ||||
0.250 | 2.375 | 7.02 | 1.2468 | .2301 | ||||
0.276 | 2.323 | 7.67 | XHY | 80 | 1.3386 | .2202 | ||
0.375 | 2.125 | 10.02 | 160 | 1.6371 | .1842 | |||
0.552 | 1.771 | 13.71 | XXXHY | 1.9971 | .1280 | |||
3 | 3.50 | 0.120 | 3.260 | 4.34 | 1.0411 | .4336 | ||
0.156 | 3.188 | 5.58 | 1.3122 | .4147 | ||||
0.172 | 3.156 | 6.12 | 1.4265 | .4064 | ||||
0.188 | 3.124 | 6.66 | 1.5342 | .3984 | ||||
0.216 | 3.068 | 7.58 | STD. | 40 | 1.7241 | .3840 | ||
0.250 | 3.000 | 8.69 | 1.9372 | .3672 | ||||
0.281 | 2.938 | 9.67 | 2.1207 | .3521 | ||||
0.300 | 2.900 | 10.26 | XHY | 80 | 2.2253 | .3431 | ||
0.438 | 2.624 | 14.34 | 160 | 2.8774 | .2811 | |||
0.600 | 2.300 | 18.6 | XXHY | 3.4243 | .2158 | |||
3 1/2 | 4.0 | 0.120 | 3.760 | 4.98 | 10 | 1.3776 | .5768 | |
0.226 | 3.548 | 9.12 | STD. | 140 | 2.3939 | .5136 | ||
0.250 | 3.500 | 10.02 | 2.6001 | .4998 | ||||
0.281 | 3.438 | 11.17 | 2.8562 | .4821 | ||||
0.318 | 3.364 | 12.52 | XHY | 80 | 3.1400 | .4617 | ||
0.636 | 2..728 | 22.87 | XXHY | 4.8795 | .3085 | |||
4 | 4.5 | 0.120 | 4.260 | 5.62 | 10 | 1.7612 | .7404 | |
0.156 | 4.188 | 7.24 | 2.2354 | .7156 | ||||
0.188 | 4.124 | 8.67 | 2.6296 | .6942 | ||||
0.203 | 4.094 | 9.32 | 2.8173 | .6838 | ||||
0.219 | 4.062 | 10.02 | 3.0184 | .6725 | ||||
0.237 | 4.026 | 10.80 | STD. | 40 | 3.2145 | .6613 | ||
0.250 | 4.000 | 11.36 | 3.3611 | .6528 | ||||
0.281 | 3.938 | 12.67 | 60 | 3.7021 | .6326 | |||
0.312 | 3.876 | 13.97 | 4.0273 | .6126 | ||||
0.337 | 3.826 | 15.00 | XHY | 80 | 4.2713 | .5972 | ||
0.438 | 3.624 | 19.02 | 120 | 5.1790 | .5361 | |||
0.531 | 3.438 | 22.53 | 160 | 5.8997 | .4822 | |||
0.674 | 3.152 | 27.57 | XXHY | 6.7927 | .4054 | |||
5 | 5.563 | 0.188 | 5.187 | 10.80 | 4.1161 | 1.0979 | ||
0.219 | 5.125 | 12.51 | 4.7279 | 1.0716 | ||||
0.258 | 5.047 | 14.63 | STD. | 40 | 5.4500 | 1.0391 | ||
0.281 | 5.001 | 15.87 | 5.8644 | 1.0204 | ||||
0.312 | 4.939 | 17.51 | 6.4074 | .99647 | ||||
0.344 | 4.875 | 19.19 | 6.9358 | .9696 | ||||
0.375 | 4.813 | 20.80 | XHY | 80 | 7.4300 | .9449 | ||
0.500 | 4.563 | 27.06 | 120 | 9.2534 | .8495 | |||
0.625 | 4.313 | 32.99 | 160 | 10.7976 | .7590 | |||
0.750 | 4.063 | 38.59 | XXHY | 12.0954 | .6734 | |||
6 | 6.625 | 0.109 | 6.407 | 7.59 | 5 | 3.5769 | 1.6748 | |
0.134 | 6.357 | 9.30 | 10 | 4.3475 | 1.6488 | |||
0.156 | 6.313 | 10.79 | 5.0107 | 1.6260 | ||||
0.188 | 6.249 | 12.94 | 5.9351 | 1.5937 | ||||
0.203 | 6.219 | 13.94 | 6.3804 | 1.5780 | ||||
0.219 | 6.187 | 15.00 | 6.8261 | 1.5620 | ||||
0.250 | 6.125 | 17.04 | 7.6905 | 1.5306 | ||||
0.280 | 6.065 | 18.99 | STD. | 40 | 8.4958 | 1.5008 | ||
0.312 | 6.001 | 21.06 | 9.3416 | 1.4688 | ||||
0.344 | 5.937 | 23.10 | 10.111 | 1.4391 | ||||
0.375 | 5.875 | 25.05 | 10.893 | 1.4082 | ||||
0.432 | 5.761 | 28.60 | XHY | 80 | 12.224 | 1.3541 | ||
0.500 | 5.625 | 32.74 | 13.711 | 1.2909 | ||||
0.562 | 5.501 | 36.43 | 120 | 14.9806 | 1.2346 | |||
0.625 | 5.375 | 40.09 | 16.1821 | 1.1787 | ||||
0.719 | 5.187 | 45.39 | 160 | 17.8243 | 1.0977 | |||
0.864 | 4.897 | 53.21 | XXHY | 20.025 | .9784 | |||
1.000 | 4.625 | 60.13 | 21.7719 | .8727 | ||||
1.125 | 4.375 | 66.14 | 23.1237 | .7809 |
PERMISSIBLE AXIAL COMPRESSIVE STRESS (YST 310 Grade) | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/r | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 |
Ac | 186 | 183 | 178 | 169 | 157 | 143 | 128 | 113 | 99 | 87 | 77 | 67 | 60 | 53 |
1/r | 150 | 160 | 170 | 180 | 190 | 200 | 210 | 220 | 230 | 240 | 250 | 300 | 350 | |
Ac | 47 | 42 | 38 | 34 | 31 | 28 | 26 | 23 | 22 | 20 | 18 | 13 | 10 |
OTHER ALLOWABLE STRESS VALUES (in Mpa) | |||||||
---|---|---|---|---|---|---|---|
Steel Grade | Minimum Yield stress | Minimum UTS | Axial Stress in Tension | Bending Stress in Ten. Or Compn. | Shear Stress | Bearing Stress 232 | Equivalent Stress |
Yst 310 | 310 | 450 | 186 | 205 | 140 | 232 | 279 |
Section Type | Grade | Mechanical Properties | Dimensional Tolerance | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
YST | UTS | % of Elongation | Outside dimension | Thickness | Squareness | Corner radius | Weight | ||||
Mpa | Mpa | < 25.4 mm | > 25.4 mm | Individual lengtds | On lot of 10 MT | ||||||
RHS/SHS IS : 1239 | YST 210 | 210 | 330 | 12 | 20 | +/-1% with a minimum of +/-0.50 mm | +/-10% | 90 deg +/-2 deg. | 3t max | 10%-8% | +/-7.5% |
YST 240 | 240 | 410 | 10 | 15 | |||||||
YST 310 | 310 | 450 | 8 | 10 | |||||||
CHS IS : 1161 | YST 210 | 210 | 330 | 12 | 20 | OD upto and incl 48.3+0.4/-0.8mm. Over 48.3 mm +/-1.0% | + no limit -10% | NA | NA | L +10%, -8% | L +/-5% |
YST 240 | 240 | 410 | 12 | 17 | M & H +/-10% | M & H +/-7.5% | |||||
YST 310 | 310 | 450 | 12 | 14 | |||||||
*YST 210 and YST 240 are also manufactured | *Galvanized sections can also be manufactured |
Length | 6.0 m +/- 0.05 m Customized length ranging from 6 m to 11 m may be supplied. |
---|---|
Straightness | Minimum 1 : 200th of any length measured along the centre line (mill straightened condition) unless otherwise specifically arranged. |
Twist tolerance | Maximum 2 mm ± 0.05 mm/m length-measured relative vertical shift of any adjacent corner of the section, measured by keeping one side on flat surface. |
End Finish | Plain ended-Mechanically sheared, mill-cut finish without further machining. |
Surface Finish / Chemical Properties | Black without any surface treatment of oiling or varnishing. |
Raw Material | Sulphur content: 0.05% max, phosphorus content: 0.05% max, equivalent carbon percentage well within specified weldability limits with matching physical properties. For corrosion resistant steel in Cu-bearing variety, refer to the WRS section. |
Weldability | Tata Structura Steel Hollow Sections are weldable with standard M.S. Electrodes without any pre-heating. |
Packing | Bundled by sealing metal strap and each bundle is labelled for size, measurement, lot number etc. Approximate weight of each bundle is 1.5 Mt (+/-500 kg). |
Identification | Marking of ‘TATA STRUCTURA’ emblem on surface, punched/stencilled/sticker pasted, on all Steel Hollow Sections. Standard BIS mark is also put on the sections. |
Note | Tata Structura Hollow Sections in customized size, grade, length, surface finish and end finish may be delivered as per agreed supply conditions. |
Maximum Allowable Pressure (psi) | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
NPS | Outside Diameter | Schedule | ||||||||||||
(in) | (in) | 10 | 20 | 30 | STD | 40 | 60 | XS | 80 | 100 | 120 | 140 | 160 | XXS |
1/4 | 0.54 | 7985 | 7985 | 10798 | 10798 | |||||||||
3/8 | 0.675 | 6606 | 6606 | 9147 | 9147 | |||||||||
1/2 | 0.84 | 6358 | 6358 | 8575 | 8575 | 10908 | 17150 | |||||||
3/4 | 1.05 | 5273 | 5273 | 7187 | 7187 | 10220 | 14373 | |||||||
1 | 1.315 | 4956 | 4956 | 6670 | 6670 | 9316 | 13340 | |||||||
1 1/4 | 1.66 | 4133 | 4133 | 5638 | 5638 | 7380 | 11276 | |||||||
1 1/2 | 1.9 | 3739 | 3739 | 5158 | 5158 | 7247 | 10316 | |||||||
2 | 2.375 | 3177 | 3177 | 4498 | 4498 | 7097 | 8995 | |||||||
2 1/2 | 2.875 | 3460 | 3460 | 4704 | 4704 | 6391 | 9408 | |||||||
3 | 3.5 | 3024 | 3024 | 4200 | 4200 | 6132 | 8400 | |||||||
3 1/2 | 4 | 2769 | 2769 | 3896 | 3896 | |||||||||
4 | 4.5 | 2581 | 2581 | 3670 | 3670 | 4769 | 5782 | 7339 | ||||||
5 | 5.563 | 2273 | 2273 | 3303 | 3303 | 4404 | 5505 | 6606 | ||||||
6 | 6.625 | 2071 | 2071 | 3195 | 3195 | 4157 | 5318 | 6390 | ||||||
8 | 8.625 | 1420 | 1574 | 1829 | 1829 | 2307 | 2841 | 2841 | 3375 | 4085 | 4613 | 5147 | 4971 | |
10 | 10.75 | 1140 | 1399 | 1664 | 1664 | 2279 | 2279 | 2708 | 3277 | 3847 | 4558 | 5128 | 4558 | |
12 | 12.75 | 961 | 1268 | 1441 | 1560 | 2160 | 1922 | 2644 | 3244 | 3843 | 4324 | 5042 | 3843 | |
14 | 14 | 875 | 1092 | 1313 | 1313 | 1533 | 2079 | 1750 | 2625 | 3283 | 3829 | 4375 | 4921 | |
16 | 16 | 766 | 956 | 1148 | 1148 | 1531 | 2009 | 1531 | 2585 | 3157 | 3733 | 4404 | 4882 | |
18 | 18 | 681 | 849 | 1192 | 1021 | 1530 | 2042 | 1361 | 2553 | 3147 | 3743 | 4252 | 4848 | |
20 | 20 | 613 | 919 | 1225 | 919 | 1455 | 1989 | 1225 | 2526 | 3138 | 3675 | 4288 | 4824 | |
22 | 22 | 557 | 835 | 1114 | 835 | 1949 | 1114 | 2506 | 3063 | 3619 | 4176 | 4733 | ||
24 | 24 | 510 | 766 | 1147 | 766 | 1405 | 1978 | 1021 | 2489 | 3126 | 3700 | 4210 | 4786 | |
30 | 30 | 510 | 817 | 1021 | 613 | 817 | ||||||||
32 | 32 | 478 | 766 | 957 | 574 | 1054 | ||||||||
34 | 34 | 450 | 721 | 901 | 540 | 992 | ||||||||
36 | 36 | 425 | 681 | 851 | 510 | 1021 | ||||||||
42 | 42 | 583 | 729 | 438 | 875 | |||||||||
1/8" IPS(.405" O.D.) | 3 1/2" IPS( 4.000" O.D.) |
---|---|
SCH 40, 80 | SCH 10, 40, 80, 160, XXH |
1/4" IPS(.540" O.D.) | 4" IPS(4.500" O.D.) |
SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
3/8" IPS(.675" O.D.) | 5" IPS( 5.563" O.D.) |
SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
1/2" IPS(.840" O.D.) | 6" IPS(6.625" O.D.) |
SCH 5, 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
3/4" IPS(1.050" O.D.) | 8 ” IPS(8.625" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
1" IPS:(1.315′ O.D.) | 10" IPS(10.750" O.D.) |
SCH 5, 10, 40, 80, 160, XXH | SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
1-1/4" IPS(1.660" O.D.) | 12" IPS(12.750" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
1-1/2" IPS(1.900" O.D.) | 14" IPS(14.000" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH10 (.188), SCH40 (.375) |
2" IPS(2.375" O.D.) | 16" IPS(16.000" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH10(.188), SCH40(.375) |
2 1/2" IPS(2.875" O.D.) | 18" IPS (18.000" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH-40 (.375) |
3" IPS( 3.500" O.D.) | |
SCH 5, 10, 40, 80, 160, XXH |
Wall | Sizes ( O.D.) |
---|---|
.010 | 1/16" , 1/8" , 3/16" |
.020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
.012 | 1/8" |
.016 | 1/8" , 3/16" |
.028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
.035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
.049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
.065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
.083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
.095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
.109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
.120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
.125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
.134 | 1" |
.250 | 3" |
.375 | 3 1/2" |
IS 1239 YST 310 Price Per Piece in India | Carbon Steel IS 1239 YST 355 Price in INR | IS 1239 YST 240 Price in Saudi Riyal | High-Alloy Steel IS 1239 Price in UAE Dirham |
---|---|---|---|
IS 1239 YST 310 Pipe Price in India | Rs.50 | Saudi Riyal 2.64 | UAE Dirham 2.59 |
Carbon Steel IS 1239 YST 355 Pipe Price in India | Rs.58 | Saudi Riyal 3.06 | UAE Dirham 3.00 |
IS 1239 YST 240 Pipe Price List | Rs.72 | Saudi Riyal 3.80 | UAE Dirham 3.73 |
High-Alloy Steel IS 1239 Pipe Cost in Mumbai | Rs.34 | Saudi Riyal 1.79 | UAE Dirham 1.76 |
Price of IS 1239-97 Pipe in Mumbai | Rs.40 | Saudi Riyal 2.11 | UAE Dirham 2.07 |
MS IS 1239 B Class Pipe Price in India | Rs.55 | Saudi Riyal 2.90 | UAE Dirham 2.85 |
Size/Diameter | 0.25 Inch |
Product Type | CARBON STEEL PIPE |
Schedule Number | SCH 10 TO SCH 80 |
Material | Carbon Steel |
Length | 10-25 m |
Thickness | 1.5-30 mm |
Tricon Steel & Alloys excels as ASTM A53 Grade B Carbon Steel Pipe, offering pipes that adhere to stringent industry standards in Libya. As one of the most prominent ASTM A53 Grade B Carbon Steel Pipe Manufacturers in Libya, we are committed to offering the best quality pipes at the most competitive prices. Our pipes in Libya are available in sizes ranging from 1/2” NB to 36”NB, with thicknesses varying from 3 to 12 millimeters. We provide both seamless and welded options in Libya, catering to diverse application needs.
Tricon Steel & Alloys in Libya excels as a provider of ASTM A106 Grade B Carbon Steel Pipes, offering a comprehensive range designed to meet diverse industrial needs. As one of the most reliable ASTM A106 Grade B Carbon Steel Pipe Manufacturers in Libya, we offer products that are available in different schedules, wall thickness, and diameters to suit a wide range of applications. Available in sizes ranging from 1/2” NB to 36” NB with thicknesses from 3 mm to 12 mm, these pipes in Libya are crafted using advanced manufacturing techniques such as cold rolling and cold drawing.
Tricon Steel & Alloys is the finest provider of ASTM A333 Grade 6 Carbon Steel Pipes, offering a wide range of sizes and specifications to meet diverse industrial requirements in Libya. Being premier ASTM A333 Grade 6 Carbon Steel Pipe Manufacturers in Libya, we offer pipes that are manufactured to meet the highest standards of quality and performance. Our pipes in Libya adhere to stringent standards, including ASTM, ASME, and API, ensuring reliability and performance.
Tricon Steel & Alloys is a leading provider of ASTM A671 Carbon Steel Pipes, designed in Libya to meet diverse industrial requirements with precision and reliability. As one of the finest ASTM A671 Carbon Steel Pipe Manufacturers in Libya, we are capable of providing the best quality products to our customers. Our pipes in Libya adhere to ASTM A671 / ASME SA671 specifications, available in sizes ranging from 2 inches to 24 inches in outer diameter (O.D.) and various wall thicknesses, including SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS, DIN, and JIS standard thicknesses.
Tricon Steel & Alloys is a trusted provider in Libya of ASTM A671 CC65/CC70 Carbon Steel Pipes, adhering to ASTM A671 / ASME SA671 standards. As one of the finest ASTM A671 CC65/CC70 Carbon Steel Pipe Manufacturers in Libya, we ensure our pipes are available in a range of sizes from 2 inches to 24 inches outer diameter (O.D.) and various wall thicknesses, including SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS, DIN, and JIS standard thicknesses.
Tricon Steel & Alloys proudly makes S275JR Carbon Steel Pipes to exacting standards, ensuring reliability and durability for diverse industrial applications in Libya. As reliable S275JR Carbon Steel Pipe Manufacturer in Libya, we are committed to providing the highest quality products. Our pipes in Libya conform to SAE/AISI 1008 (Si 0.03%) and are compliant with various international specifications, including EN 10219 -1- S275 J0H, EN 10219 -1- S355 MH, and EN 10025 -2- S275JR+AR.
ASTM A210 Grade A1 Carbon Steel Seamless Pipes find extensive application in industries in Libya requiring high-quality, low and medium pressure boiler tubes. These pipes are designed in Libya to withstand elevated temperatures and pressures, making them ideal for use in boilers, heat exchangers, condensers, and similar applications. As one of the most prominent ASTM A210 Gr A1 Carbon Steel Seamless Pipes Suppliers in Libya, we deliver our products within the quickest turnaround time.
At Tricon Steel & Alloys in Libya, we manufacture IS 3589 Fe 410 Carbon Steel Pipes to meet the demanding standards of various industrial applications. As one of the leading IS 3589 Fe 410 Carbon Steel Pipe Manufacturers in Libya, we manufacture these pipes using premium quality raw material sourced from trusted vendors. These pipes in Libya, available in sizes ranging from 15 Nominal Bore to 150 Nominal Bore, are built to ensure durability and performance.