| Standard |
AISI, DIN, EN, GB, IS, JIS, ASTM, ASME Pipe |
| S235jrh En 10219 Carbon Steel Seamless Pipe Size |
4 to 219mm W. T.: 0.5 to 20mm |
| En 10219-1 Grade S235jrh Steel Welded Pipe Size |
5.0 mm – 1219.2 mm |
| En 10219-1 Gr S235jrh Steel EFW Pipe size |
5.0 mm – 1219.2 mm |
| En 10219 S235jrh Steel Tube Swg & Bwg |
10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Din En 10219 S235jr Pipe Schedule |
SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Carbon Steel EN 10219 S235JRH Seamless Tube Size |
3.35 mm OD To 101.6 mm OD |
| En 10219 S235jrh Steel Welded Tube Size |
6.35 mm OD To 152 mm OD |
| EN 10219 S235JRH Carbon Steel Swg & Bwg |
10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Carbon Steel EN 10219 Tube wall thickness |
0.020" –0.220", (special wall thicknesses available) |
| EN 1.0039 Length |
Single Random, Double Random, Standard & Cut length Pipe & Tube |
| S235JRH Finish |
Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| Mild Steel S235JRH Form |
Round, Hydraulic, ‘U’ bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc |
| En 10219-1 Grade S235jrh Steel Type |
Welded, Seamless, ERW, EFW, Fabricated Pipe, ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc |
| Carbon Steel S235JRHEN 10219 End |
Plain End, Beveled End, Treaded Pipe & Tube |
| S235jrh En 10219 Carbon Steel Marking |
All S235JRH EN 10219 Carbon Steel Seamless Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| S235JRH Steel Application |
Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube |
| En 10219-1 Gr S235jrh Steel Value Added Service |
Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| EN10219 S235JRH Circular Hollow Section Specialize in |
- Carbon Steel EN 10219 Large Diameter Pipe
- Carbon Steel S235JRHEN 10219 Circular Hollow Section
- S235JRH EN 10219 Heat Exchanger &
- S235JRH EN 10219 Hollow Section Condenser Tube
|
| Material Test Certificates (MTC) |
Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report,
Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, Heat Treatment Charts,
Mild Steel S235JRH Pipe HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP) |
| Manufacturers of S235JRH Steel Pipe |
- Kobe Special Tube, Japan
- Sumitomo Metals, Japan
- Nippon Steel Corporation, Japan
- Sanyo Special Steel, Japan
- Tubacex Tubos Inoxidables S.A., Spain
- Schoeller Bleckmann, Austria
- Seah Steel Corporation, Korea
|
