At Tricon Steel & Alloys in Indonesia, we offer high-quality EN 10216-2 P265GH steel pipes that meet stringent international standards for seamless pressure service. As one of the leading EN 10216-2 P265GH Steel Pipe Manufacturers in Indonesia, we offer products that are made frpm high-quality raw materials and are available at competitive prices. We provide in Indonesia lengths of 5.8m, 11.8m, 12m, or random lengths. The pipes are normalized to ensure superior performance in high-pressure environments in Indonesia.
These pipes in Indonesia are essential in various industrial applications, particularly where high-temperature and high-pressure conditions are prevalent. As reliable EN 10216-2 P265GH Steel Pipe Suppliers in Indonesia, we ensure that our pipes meet the stringent requirements of industries such as oil and gas, petrochemicals, and power generation. They are used in boilers, heat exchangers, and pressure vessels, providing robust performance and durability in demanding environments in Indonesia.
Our pipes in Indonesia are accompanied by Material Test Certificates (MTC), ensuring traceability and compliance. We also offer flexible shipping options in Indonesia, including 20'GP/40'GP/40'HQ FCL or LCL, with incoterms such as EXW, FOB, CFR, and GIF. Our delivery times depend on stock availability and order quantities in Indonesia. As trusted EN 10216-2 P265GH Steel Pipe Exporters in Indonesia, we ensure that each pipe undergoes rigorous quality checks to meet international standards.
Product | EN 10216-2 P195GH Seamless Steel Tube for Pressure Service |
Standard | EN 102ie-2 |
Materials | P195GH, EN P235GH, P265GH |
Outside Diameter | 10.2-711mm |
Wall Thickness | 1.6-100mm |
Length | 5.8m, Elm, 11.8m, 12m or random length |
Delivery Conditon | Normalized |
MOQ | 2 Tons per size |
Shippment | 20'GP/40'GP/40'HQ FCL or LCL |
Incoterms | EXW, FOB, CFR, GIF |
Payment | 1}20%/30% T.T deposit, 80%/70% T/T balance before shipment. 2)20%/30% T.T deposit, 80%/70% T/T against the copy of B/L. |
Delivery | Depends on the stock availability and actual order quantities. |
Mechanical Properties | |||||||||||||
Pipe Types | Steel grades | Mechanical properties during tensile testing in room temperature | Resilience | ||||||||||
Boiler P195GH, P235GG P265GH 16Mo3 14MoV6-3 13CrMo4-5 10CrMo9-10 Wg PN-EN 10216-2 |
Upper yield limit or yield strength Re or R0,2 for wall thickness of t min | Tensile strength Rm | Elongation A min% |
Minimum energy average absorbed KVJ at the temperature of 0°C | |||||||||
T<=16 | 16 | 40 | 60 | I | T | ||||||||
MPa | MPa | MPa | MPa | MPa | I | t | 20 | 0 | -10 | 20 | 0 | ||
EN P195GH | 195 | - | - | - | 320- 440 | 27 | 25 | - | 40 | 28 | - | 27 | |
EN P235GH | 235 | 225 | 215 | - | 360- 500 | 25 | 23 | - | 40 | 28 | - | 27 | |
EN P265GH | 265 | 255 | 245 | - | 410- 570 | 23 | 21 | - | 40 | 28 | - | 27 | |
16Mo3 | 280 | 270 | 260 | - | 450- 600 | 22 | 20 | 40 | - | - | 27 | - | |
14MoV6-3 | 320 | 320 | 310 | - | 460- 610 | 20 | 18 | 40 | - | - | 27 | - | |
13CrMo4-5 | 290 | 290 | 280 | - | 440- 590 | 22 | 20 | 40 | - | - | 27 | - | |
10CrMo9-10 | 280 | 280 | 270 | - | 480- 630 | 22 | 20 | 40 | - | - | 27 | - |
Steel Grades | CHEMICAL COMPOSITION (LADLE ANALYSIS) | |||||||||||||
C% max | Si% max | Mn% max | P% max | S% max | Cr% max | Mo% max | Ni% max | Al.cał% min | Cu% max | Nb% max | Ti% max | V% max | Cr+ Cu+ Mo+ Ni% MAX | |
EN P195GH | 0,13 | 0,35 | 0,70 | 0,025 | 0,020 | 0,30 | 0,08 | 0,30 | >= 0,020 | 0,30 | 0,010 | 0,040 | 0,02 | 0,70 |
EN P235GH | 0,16 | 0,35 | 1,20 | 0,025 | 0,020 | 0,30 | 0,08 | 0,30 | >= 0,020 | 0,30 | 0,010 | 0,040 | 0,02 | 0,70 |
EN P265GH | 0,20 | 0,40 | 1,40 | 0,025 | 0,020 | 0,30 | 0,08 | 0,30 | >= 0,020 | 0,30 | 0,010 | 0,040 | 0,02 | 0,70 |
16Mo3 | 0,12- 0,20 | 0,35 | 0,40- 0,70 | 0,025 | 0,020 | 0,30 | 0,25- 0,35 | 0,30 | >= 0,020 | 0,30 | - | - | - | - |
14MoV6-3 | 0,10- 0,15 | 0,15- 0,35 | 0,40- 0,70 | 0,025 | 0,020 | 0,30- 0,60 | 0,50- 0,70 | 0,30 | >= 0,020 | 0,30 | - | 0,22-0,28 | - | - |
13CrMo4-5 | 0,15 | 0,50- 1,00 | 0,30- 0,60 | 0,025 | 0,020 | 1,00- 1,50 | 0,45- 0,65 | 0,30 | >= 0,020 | 0,30 | - | - | - | - |
10CrMo9-10 | 0,10- 0,17 | 0,35 | 0,40- 0,70 | 0,025 | 0,020 | 0,70- 1,15 | 0,40- 0,60 | 0,30 | >= 0,020 | 0,30 | - | - | - |
Standards | DIN 17175, BS 3059, ASTM A213, ASME SA213, ASTM A335, NF A 49-213, ASTM A209, JIS G3462, JIS G3458 |
Materials | 15Mo3, 243, TU 15 D 3, 15MoG, 20MoG, SA209T1, SA209T1a, P1, STBA12, STBA13, STPA12, C-0.5Mo |
EN 10216-2 Outside Diameter and Wall Thickness Tolerances | |||||
---|---|---|---|---|---|
Outside diameter D mm | Permissible deviations of outside diameter D |
Permissible deviations of wall thickness depending on the T/D ratio |
|||
≤0.025 | >0.025 ≤0.050 |
>0.050 ≤0.10 |
>0.10 | ||
D≤219,1 | +- 1% or =- 0.5mm depending on which is greater | +- 12,5% or 0.4 mm depending on which is greater | |||
D>219,1 | =- 20% | =- 15% | =- 12,5% | =- 10% |
EN 10216-2 P265gh-tc1 Testing and Documentation
Inspection and test type | Test frequency | Test category | ||
---|---|---|---|---|
Mandatory tests | Ladle analysis | One per ladle | 1 | 2 |
Tensile testing in room temperature | One per every test pipe | X | X | |
Flattening test for D<600mm and the ratio of D≤0.15 but T≤40mm or ring testing for D>150mm and T ≤40mm | X | X | ||
Rolling test on a mandrel bar for D≤150mm and T≤10mm or ring testing for D≤114,3mm and T ≤12,5mm | X | X | ||
Resilience testing at the temperature of 20 ºC | X | X | ||
Tightness testing | Every pipe | X | X | |
Dimensional testing | X | X | ||
Visual inspection | X | X | ||
NDT in order to identify longitudinal discontinuity | Every pipe | X | X | |
Material identification for alloy steel | X | X | ||
Optional tests | Final product analysis | One per ladle | X | X |
Tensile testing at elevated temperature | One per ladle and for the same thermal processing conditions | X | X | |
Resilience testing | One per every test pipe | X | X | |
Resilience testing in the machine direction at the temperature of -10ºC for non-alloy steel grades | X | X | ||
Wall thickness measurement at a distance from pipe ends | X | X | ||
NDT in order to identify transverse discontinuity | Every pipe |
X | X | |
NDT in order to identify delamination | X | X |
Outer diameter and wall Thickness | |||||||||
---|---|---|---|---|---|---|---|---|---|
Execution | Size Range | OD Tolerance | Wall tolerance | ||||||
Hot-rolled Tube | OD – 80 mmOD > 80 mmWall < 12 mmWall - 12 mm | ± 0.4 mm± 0.5 % of OD | ± 0.7 mm± (5 % x wallthickness + 0.1 mm | ||||||
Hot-rolled peeled tube | All sizesWall < 12 mmWall - 12 mm | + 0.25/- 0 mm | ± 0.8 mm± (5 % x wall thickness+ 0.2 mm) | ||||||
Cold Worked tubecold-rolled or cold-drawn | OD < 40 mmOD 40 - 80 mmOD > 80 Wall Thickness< 6 mm Wall Thickness6 - 8 mm Wall Thickness > 8 | + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* | ± 0.30 mm± 0.35 mm± 0.40 mm |
Component length (mm) | OD 30-100 mm | OD 100-254 mm |
10-100 | + 1.0/- 0 | + 2.0/- 0 |
100-600 | + 2.0/- 0 | + 3.0/- 0 |
600-1200 | + 3.0/- 0 | + 4.0/- 0 |
1200-5000 | + 5.0/- 0 | + 6.0/- 0 |
1/8" IPS(.405" O.D.) | 3 1/2" IPS( 4.000" O.D.) |
---|---|
SCH 40, 80 | SCH 10, 40, 80, 160, XXH |
1/4" IPS(.540" O.D.) | 4" IPS(4.500" O.D.) |
SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
3/8" IPS(.675" O.D.) | 5" IPS( 5.563" O.D.) |
SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
1/2" IPS(.840" O.D.) | 6" IPS(6.625" O.D.) |
SCH 5, 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
3/4" IPS(1.050" O.D.) | 8 ” IPS(8.625" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
1" IPS:(1.315′ O.D.) | 10" IPS(10.750" O.D.) |
SCH 5, 10, 40, 80, 160, XXH | SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
1-1/4" IPS(1.660" O.D.) | 12" IPS(12.750" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
1-1/2" IPS(1.900" O.D.) | 14" IPS(14.000" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH10 (.188), SCH40 (.375) |
2" IPS(2.375" O.D.) | 16" IPS(16.000" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH10(.188), SCH40(.375) |
2 1/2" IPS(2.875" O.D.) | 18" IPS (18.000" O.D.) |
SCH 10, 40, 80, 160, XXH | SCH-40 (.375) |
3" IPS( 3.500" O.D.) | |
SCH 5, 10, 40, 80, 160, XXH |
Wall | Sizes ( O.D.) |
---|---|
.010 | 1/16" , 1/8" , 3/16" |
.020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
.012 | 1/8" |
.016 | 1/8" , 3/16" |
.028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
.035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
.049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
.065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
.083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
.095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
.109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
.120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
.125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
.134 | 1" |
.250 | 3" |
.375 | 3 1/2" |
At Tricon Steel & Alloys in Indonesia, we pride ourselves on manufacturing high-quality EN 10219 S235JRH Carbon Steel Pipes that meet rigorous international standards. Being one of the finest EN 10219 S235JRH Carbon Steel Pipe Manufacturers in Indonesia, we ensure our pipes are crafted to ensure durability and performance across various applications. These pipes are manufactured in Indonesia to adhere to standards such as AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME.
Tricon Steel & Alloys offers high-quality EN 10219 S355JOH Steel Pipes designed in Indonesia to meet diverse industrial applications. As one of the most prominent EN 10219 S355JOH Steel Pipe Manufacturers in Indonesia, we provide the products with assurance of quality.These pipes in Indonesia adhere to stringent standards, including AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME. Our seamless pipes range from 4mm to 219mm in diameter with wall thicknesses between 0.5mm and 20mm, while welded pipes are available from 5.0mm to 1219.2mm in size in Indonesia.
Tricon Steel & Alloys provides high-grade Carbon Steel Pipes in Indonesia that comply with several international standards, including AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME. As reliable EN 10219 S275JOH Steel Pipe Manufacturers in Indonesia, we ensure that our pipes are produced from high quality raw materials. Our seamless pipes in Indonesia range from 4mm to 219mm in diameter, with wall thicknesses between 0.5mm and 20mm. We offer welded pipes in Indonesia ranging from 5.0mm to 1219.2mm in size and EFW pipes in the same dimensions.
Tricon Steel & Alloys provides EN 10210 S355J2H Steel Pipes that meet stringent international standards such as AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME in Indonesia. As leading EN 10210 S355J2H Steel Pipe Manufacturers in Indonesia, we ensure precision in all our products. Our seamless pipes in Indonesia are available in sizes ranging from 4mm to 219mm with wall thicknesses between 0.5mm and 20mm. The welded pipes in Indonesia come in dimensions ranging from 5.0mm to 1219.2mm.
At Tricon Steel & Alloys in Indonesia, we offer top-quality EN 10217-1 P235TR1 steel pipes, ideal for a variety of applications. As one of the finest EN 10217-1 P235TR1 Steel Pipe Manufacturers in Indonesia, we manufacture our products with the highest quality standards. These pipes in Indonesia come in various lengths, including 3 meters, 6 meters, 18 meters, 36 meters, and longer. Our EN 10217-1 P235TR1 pipes are manufactured in Indonesia in compliance with international standards. Available in a range of sizes and diameters, from 1/2 inch to over 4 inches, these pipes are suitable for diverse industrial requirements in Indonesia.
Tricon Steel & Alloys offers high-quality EN 10216-1 P235TR2 Steel Pipes, manufactured using a seamless process to ensure exceptional strength and durability in Indonesia. As reliable EN 10216-1 P235TR2 Steel Pipe Manufacturers in Indonesia, we ensure that these pipes are designed to meet a wide range of industrial applications. Available in Indonesia in various dimensions, our pipes range from 14mm to 509mm in outer diameter and 2mm to 50mm in wall thickness. These pipes in Indonesia can be supplied with plain ends, beveled ends, or threaded ends, depending on your specific requirements.
At Tricon Steel & Alloys, we provide high-quality steel pipes, renowned in Indonesia for their exceptional strength and durability. We take pride in being one of the leading EN 10216-3 P355N Steel Pipe Manufacturers in Indonesia. These pipes in Indonesia are available in round shapes with nominal lengths of 3 meters, 6 meters, and 9 meters, or customized as per your requirements. Our EN 10216-3 P355N steel pipes are all new, with single piece lengths ranging from 6 meters to 18 meters, or as specified in Indonesia .
At Tricon Steel & Alloys in Indonesia, we provide premium EN 10216-2 P235GH alloy steel pipes designed for high-temperature applications. As leading EN 10216-2 P235GH Steel Pipe Manufacturers in Indonesia, we ensure our products meet stringent industry standards for reliability and performance. These pipes in Indonesia are manufactured through a seamless process, ensuring superior strength and durability. Our pipes in Indonesia are finished with plain ends, beveled ends, or threaded ends to suit various installation needs.
Tricon Steel & Alloys specializes in manufacturing S355J2 Carbon Steel Round Bars in Indonesia that meet the highest quality standards. As leading S355J2 Carbon Steel Round Bar Manufacturers in Indonesia, we make sure that our round bars are available in various forms including round, hexagonal, flat, half-round, oval, and rectangular shapes, offered in both black and bright finishes. We ensure flexibility with sizes ranging from 22mm up to 800mm, with thickness options spanning 1 to 2 inches in Indonesia. Each bar in Indonesia is crafted to precise lengths of 3 meters or 6 meters, catering to diverse industrial requirements.