Specifications in Chile of EN 10216-2 P235GH Steel Pipe
At Tricon Steel & Alloys in Chile, we provide premium EN 10216-2 P235GH alloy steel pipes designed for high-temperature applications. As leading EN 10216-2 P235GH Steel Pipe Manufacturers in Chile, we ensure our products meet stringent industry standards for reliability and performance. These pipes in Chile are manufactured through a seamless process, ensuring superior strength and durability. Our pipes in Chile are finished with plain ends, beveled ends, or threaded ends to suit various installation needs.
Manufacture: Seamless Process
Outer Diameter: 21 mm to 509 mm
Wall Thickness: 2.1 mm to 20 mm
Length: 6M or specified length as required
Ends: Plain End, Beveled End, Threaded
Uses of EN 10216-2 P235GH Alloy Steel Pipes in Chile
Looking for EN 10216-2 P235GH Alloy Steel Pipes Suppliers in Chile?
Our EN 10216-2 P235GH alloy steel pipes are widely used in the construction of boilers, pressure vessels, and pipelines due to their excellent high-temperature performance in Chile. As trusted EN 10216-2 P235GH Alloy Steel Pipes Suppliers in Chile, we ensure that our pipes meet the specific needs of these demanding applications. These pipes are known for their durability, making them ideal for transporting fluids under high pressure and temperature conditions in Chile.
Application Areas: Boilers, pressure vessels, pipelines in Chile
Industries: Oil and gas, chemical processing, power generation in Chile
Specific Uses: High-temperature fluid transport in Chile
Quality Assurance of EN 10216-2 P235GH Alloy Steel Pipes in Chile
Most Trusted EN 10216-2 P235GH Alloy Steel Pipes Exporters in Chile
Our EN 10216-2 P235GH alloy steel pipes undergo rigorous testing to ensure they meet international standards and client specifications in Chile. We provide comprehensive documentation, including Material Test Certificates (MTC), third-party inspection reports, and heat treatment charts in Chile. As renowned EN 10216-2 P235GH Alloy Steel Pipes Exporters in Chile, we are committed to delivering products that are reliable and of the highest quality.
Testing and Documentation: Material Test Certificates (MTC), Third Party Inspection Reports, Heat Treatment Charts in Chile
Quality Control: Rigorous testing to meet international standards in Chile
Commitment: Ensuring reliability and highest quality in every pipe in Chile
EN 10216-2 1.0345 P235GH Seamless Steel Tubes
Manufacture
Seamless Process
Out Diameter
21 mm——509mm
Wall Thickness
2.1mm——20 mm
Length
6M or Specified Length as Required.
Ends
Plain End, Beveled End, Treaded
EN 10216-2 P235GH Seamless Steel Tubes
Steel grade
Heat
treatment
a
Austenizing
Tempering
Steel
name
Steel
number
Temperature °C
Cooling
Medium
Temperature °C
Cooling
medium
P235GH
1.0345
+N b
880 to 940
Air
-
-
a +N = Normalising, +NT = Normalising + Tempering, +QT = Quenching + Tempering (air or liquid), +I = Isothermal Annealing.
b Normalising includes Normalising Forming.
Chemical Composition of EN 10216-2 P235GH
Steel grade
Steel
number
C
Si
Mn
P
max
S
max
Cr
Mo
Ni
P235GH
1.0345
≤ 0,16
≤ 0,35
≤ 1,20
0,025
0,020
≤ 0,30
≤ 0,08
≤ 0,30
Al tot
Cu
Nb
Ti max
V
Cr+Cu+Mo+Ni
Others
≥ 0,020
≤ 0,30
≤ 0,010
0,040
≤ 0,02
≤ 0,70
-
Mechanical Properties of EN 10216-2 P235GH
Steel grade
Upper yield strength or proof strength
R eH or Rp 0,2 for Wall Thickness T
min.
Tensile
Strength
Rm
Elongation
A min.
% a
Steel name
Steel
number
T ≤ 16
16 < T ≤ 40
40 < T ≤ 60
60 < T ≤ 100
l
t
MPa *
MPa *
MPa *
MPa *
MPa *
P235GH
1.0345
235
225
215
-
360 to 500
25
23
Dimensions Tolerances of EN 10216-2
Outside Diameter D mm
Tolerances on
D
Tolerances on T for a T/D ratio
≤ 0,025
> 0,025
≤ 0,050
> 0,050
≤ 0,10
> 0,10
D ≤ 219,1
± 1% or ± 0.5mm
whichever is the greater
± 12,5% or ± 0.4mm whichever is the greater
D > 219,1
± 20%
± 15%
± 12,5%
± 10% a
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T
Tolerances on Inside Diameter and Wall Thickness
Tolerances on inside diameter
Tolerances on T for a T/d ratio
d
d min
≤ 0,03
> 0,03
≤ 0,06
> 0,06
≤ 0,12
> 0,12
± 1% or ± 2 mm whichever is the greater
(+ 2% ,0)or (+ 4 mm,0)
whichever is the greater
± 20%
± 15%
± 12,5%
± 10% a
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T
Tolerances on OutsideDiameter and Minimum Wall Thickness
Outside diameter D mm
Tolerances on D
Tolerances on T min for a T min /D ratio
≤ 0,02
> 0,02
≤ 0,04
> 0,04
≤ 0,09
> 0,09
D ≤ 219,1
± 1% or ± 0.5mm
whichever is the greater
(+ 28%,0) or (+ 0.8 mm,0) whichever is the greater
D > 219,1
+ 50%
0
+ 35%
0
+ 28%
0
+ 22% a
0
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T
Tolerances on Inside Diameter and Minimum Wall Thickness
Tolerances
on inside diameter
Tolerances on T min for a
T min /d ratio
d
d min
≤ 0,05
> 0,05
≤ 0,1
> 0,1
± 1% or ± 2 mm
whichever is the greater
(+2%,0) or (+ 4 mm,0) whichever is the greater
+ 35%
0
+ 28%
0
+ 22% a
0
For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T
Tolerances on Exact Lengths
Length L
Tolerance on exact length
L ≤ 6000
+10
0
6000 < L ≤ 12 000
+15
0
L > 12 000
+ by agreement
0
Testings
(1)Chemical analysis
(2)Tensile test(Tensile test at room temperature, Tensile test at elevated temperature)
(3)Flattening test
(4)Ring tensile test
(5)Drift expanding test
(6)Ring expanding test
(7)Impact test
(8)Leak tightness test(Hydrostatic test, Electromagnetic test)
(9)Dimensional inspection
(10) Visual examination
(11) Non-destructive testing
Ordering Information
Mandatory information
a) the quantity (mass or total length or number);
b) the term "tube";
c) the dimensions ;
d) the designation of the steel grade in accordance with this Part of EN 10216 ;
e) the test category for non-alloy steel .
Options
1) Cold finishing.
2) Restriction on copper and tin content.
3) Product analysis.
4) Impact testing .
5) Longitudinal impact testing at -10° C for non-alloy steel grades.
6) Tensile testing at elevated temperature .
7) Selection of leak-tightness test method .
8) Non-Destructive Testing for test category 2 tubes for detection of transverse imperfections.
9) Non-Destructive Testing for test category 2 tubes for detection of laminar imperfections .
10) Special ends preparation.
11) Set of dimensions other than D and T.
12) Exact lengths ).
13) The type of inspection document other than the standard document.
14) Test pressure for hydrostatic leak-tightness test .
15) Wall thickness measurement away from the ends .
16) Non-Destructive Testing method.
17) Additional marking .
18) Protection .
At Tricon Steel & Alloys in Chile, we pride ourselves on manufacturing high-quality EN 10219 S235JRH Carbon Steel Pipes that meet rigorous international standards. Being one of the finest EN 10219 S235JRH Carbon Steel Pipe Manufacturers in Chile, we ensure our pipes are crafted to ensure durability and performance across various applications. These pipes are manufactured in Chile to adhere to standards such as AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME.
Tricon Steel & Alloys offers high-quality EN 10219 S355JOH Steel Pipes designed in Chile to meet diverse industrial applications. As one of the most prominent EN 10219 S355JOH Steel Pipe Manufacturers in Chile, we provide the products with assurance of quality.These pipes in Chile adhere to stringent standards, including AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME. Our seamless pipes range from 4mm to 219mm in diameter with wall thicknesses between 0.5mm and 20mm, while welded pipes are available from 5.0mm to 1219.2mm in size in Chile.
Tricon Steel & Alloys provides high-grade Carbon Steel Pipes in Chile that comply with several international standards, including AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME. As reliable EN 10219 S275JOH Steel Pipe Manufacturers in Chile, we ensure that our pipes are produced from high quality raw materials. Our seamless pipes in Chile range from 4mm to 219mm in diameter, with wall thicknesses between 0.5mm and 20mm. We offer welded pipes in Chile ranging from 5.0mm to 1219.2mm in size and EFW pipes in the same dimensions.
Tricon Steel & Alloys provides EN 10210 S355J2H Steel Pipes that meet stringent international standards such as AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME in Chile. As leading EN 10210 S355J2H Steel Pipe Manufacturers in Chile, we ensure precision in all our products. Our seamless pipes in Chile are available in sizes ranging from 4mm to 219mm with wall thicknesses between 0.5mm and 20mm. The welded pipes in Chile come in dimensions ranging from 5.0mm to 1219.2mm.
At Tricon Steel & Alloys in Chile, we offer top-quality EN 10217-1 P235TR1 steel pipes, ideal for a variety of applications. As one of the finest EN 10217-1 P235TR1 Steel Pipe Manufacturers in Chile, we manufacture our products with the highest quality standards. These pipes in Chile come in various lengths, including 3 meters, 6 meters, 18 meters, 36 meters, and longer. Our EN 10217-1 P235TR1 pipes are manufactured in Chile in compliance with international standards. Available in a range of sizes and diameters, from 1/2 inch to over 4 inches, these pipes are suitable for diverse industrial requirements in Chile.
Tricon Steel & Alloys offers high-quality EN 10216-1 P235TR2 Steel Pipes, manufactured using a seamless process to ensure exceptional strength and durability in Chile. As reliable EN 10216-1 P235TR2 Steel Pipe Manufacturers in Chile, we ensure that these pipes are designed to meet a wide range of industrial applications. Available in Chile in various dimensions, our pipes range from 14mm to 509mm in outer diameter and 2mm to 50mm in wall thickness. These pipes in Chile can be supplied with plain ends, beveled ends, or threaded ends, depending on your specific requirements.
At Tricon Steel & Alloys, we provide high-quality steel pipes, renowned in Chile for their exceptional strength and durability. We take pride in being one of the leading EN 10216-3 P355N Steel Pipe Manufacturers in Chile. These pipes in Chile are available in round shapes with nominal lengths of 3 meters, 6 meters, and 9 meters, or customized as per your requirements. Our EN 10216-3 P355N steel pipes are all new, with single piece lengths ranging from 6 meters to 18 meters, or as specified in Chile .
At Tricon Steel & Alloys in Chile, we offer high-quality EN 10216-2 P265GH steel pipes that meet stringent international standards for seamless pressure service. As one of the leading EN 10216-2 P265GH Steel Pipe Manufacturers in Chile, we offer products that are made frpm high-quality raw materials and are available at competitive prices. We provide in Chile lengths of 5.8m, 11.8m, 12m, or random lengths. The pipes are normalized to ensure superior performance in high-pressure environments in Chile.
Tricon Steel & Alloys specializes in manufacturing S355J2 Carbon Steel Round Bars in Chile that meet the highest quality standards. As leading S355J2 Carbon Steel Round Bar Manufacturers in Chile, we make sure that our round bars are available in various forms including round, hexagonal, flat, half-round, oval, and rectangular shapes, offered in both black and bright finishes. We ensure flexibility with sizes ranging from 22mm up to 800mm, with thickness options spanning 1 to 2 inches in Chile. Each bar in Chile is crafted to precise lengths of 3 meters or 6 meters, catering to diverse industrial requirements.
