Specifications in Austria of EN 10216-2 P235GH Steel Pipe
At Tricon Steel & Alloys in Austria, we provide premium EN 10216-2 P235GH alloy steel pipes designed for high-temperature applications. As leading EN 10216-2 P235GH Steel Pipe Manufacturers in Austria, we ensure our products meet stringent industry standards for reliability and performance. These pipes in Austria are manufactured through a seamless process, ensuring superior strength and durability. Our pipes in Austria are finished with plain ends, beveled ends, or threaded ends to suit various installation needs.
Manufacture: Seamless Process
Outer Diameter: 21 mm to 509 mm
Wall Thickness: 2.1 mm to 20 mm
Length: 6M or specified length as required
Ends: Plain End, Beveled End, Threaded
Uses of EN 10216-2 P235GH Alloy Steel Pipes in Austria
Looking for EN 10216-2 P235GH Alloy Steel Pipes Suppliers in Austria?
Our EN 10216-2 P235GH alloy steel pipes are widely used in the construction of boilers, pressure vessels, and pipelines due to their excellent high-temperature performance in Austria. As trusted EN 10216-2 P235GH Alloy Steel Pipes Suppliers in Austria, we ensure that our pipes meet the specific needs of these demanding applications. These pipes are known for their durability, making them ideal for transporting fluids under high pressure and temperature conditions in Austria.
Application Areas: Boilers, pressure vessels, pipelines in Austria
Industries: Oil and gas, chemical processing, power generation in Austria
Specific Uses: High-temperature fluid transport in Austria
Quality Assurance of EN 10216-2 P235GH Alloy Steel Pipes in Austria
Most Trusted EN 10216-2 P235GH Alloy Steel Pipes Exporters in Austria
Our EN 10216-2 P235GH alloy steel pipes undergo rigorous testing to ensure they meet international standards and client specifications in Austria. We provide comprehensive documentation, including Material Test Certificates (MTC), third-party inspection reports, and heat treatment charts in Austria. As renowned EN 10216-2 P235GH Alloy Steel Pipes Exporters in Austria, we are committed to delivering products that are reliable and of the highest quality.
Testing and Documentation: Material Test Certificates (MTC), Third Party Inspection Reports, Heat Treatment Charts in Austria
Quality Control: Rigorous testing to meet international standards in Austria
Commitment: Ensuring reliability and highest quality in every pipe in Austria
EN 10216-2 1.0345 P235GH Seamless Steel Tubes
Manufacture
Seamless Process
Out Diameter
21 mm——509mm
Wall Thickness
2.1mm——20 mm
Length
6M or Specified Length as Required.
Ends
Plain End, Beveled End, Treaded
EN 10216-2 P235GH Seamless Steel Tubes
Steel grade
Heat
treatment
a
Austenizing
Tempering
Steel
name
Steel
number
Temperature °C
Cooling
Medium
Temperature °C
Cooling
medium
P235GH
1.0345
+N b
880 to 940
Air
-
-
a +N = Normalising, +NT = Normalising + Tempering, +QT = Quenching + Tempering (air or liquid), +I = Isothermal Annealing.
b Normalising includes Normalising Forming.
Chemical Composition of EN 10216-2 P235GH
Steel grade
Steel
number
C
Si
Mn
P
max
S
max
Cr
Mo
Ni
P235GH
1.0345
≤ 0,16
≤ 0,35
≤ 1,20
0,025
0,020
≤ 0,30
≤ 0,08
≤ 0,30
Al tot
Cu
Nb
Ti max
V
Cr+Cu+Mo+Ni
Others
≥ 0,020
≤ 0,30
≤ 0,010
0,040
≤ 0,02
≤ 0,70
-
Mechanical Properties of EN 10216-2 P235GH
Steel grade
Upper yield strength or proof strength
R eH or Rp 0,2 for Wall Thickness T
min.
Tensile
Strength
Rm
Elongation
A min.
% a
Steel name
Steel
number
T ≤ 16
16 < T ≤ 40
40 < T ≤ 60
60 < T ≤ 100
l
t
MPa *
MPa *
MPa *
MPa *
MPa *
P235GH
1.0345
235
225
215
-
360 to 500
25
23
Dimensions Tolerances of EN 10216-2
Outside Diameter D mm
Tolerances on
D
Tolerances on T for a T/D ratio
≤ 0,025
> 0,025
≤ 0,050
> 0,050
≤ 0,10
> 0,10
D ≤ 219,1
± 1% or ± 0.5mm
whichever is the greater
± 12,5% or ± 0.4mm whichever is the greater
D > 219,1
± 20%
± 15%
± 12,5%
± 10% a
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T
Tolerances on Inside Diameter and Wall Thickness
Tolerances on inside diameter
Tolerances on T for a T/d ratio
d
d min
≤ 0,03
> 0,03
≤ 0,06
> 0,06
≤ 0,12
> 0,12
± 1% or ± 2 mm whichever is the greater
(+ 2% ,0)or (+ 4 mm,0)
whichever is the greater
± 20%
± 15%
± 12,5%
± 10% a
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T
Tolerances on OutsideDiameter and Minimum Wall Thickness
Outside diameter D mm
Tolerances on D
Tolerances on T min for a T min /D ratio
≤ 0,02
> 0,02
≤ 0,04
> 0,04
≤ 0,09
> 0,09
D ≤ 219,1
± 1% or ± 0.5mm
whichever is the greater
(+ 28%,0) or (+ 0.8 mm,0) whichever is the greater
D > 219,1
+ 50%
0
+ 35%
0
+ 28%
0
+ 22% a
0
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T
Tolerances on Inside Diameter and Minimum Wall Thickness
Tolerances
on inside diameter
Tolerances on T min for a
T min /d ratio
d
d min
≤ 0,05
> 0,05
≤ 0,1
> 0,1
± 1% or ± 2 mm
whichever is the greater
(+2%,0) or (+ 4 mm,0) whichever is the greater
+ 35%
0
+ 28%
0
+ 22% a
0
For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T
Tolerances on Exact Lengths
Length L
Tolerance on exact length
L ≤ 6000
+10
0
6000 < L ≤ 12 000
+15
0
L > 12 000
+ by agreement
0
Testings
(1)Chemical analysis
(2)Tensile test(Tensile test at room temperature, Tensile test at elevated temperature)
(3)Flattening test
(4)Ring tensile test
(5)Drift expanding test
(6)Ring expanding test
(7)Impact test
(8)Leak tightness test(Hydrostatic test, Electromagnetic test)
(9)Dimensional inspection
(10) Visual examination
(11) Non-destructive testing
Ordering Information
Mandatory information
a) the quantity (mass or total length or number);
b) the term "tube";
c) the dimensions ;
d) the designation of the steel grade in accordance with this Part of EN 10216 ;
e) the test category for non-alloy steel .
Options
1) Cold finishing.
2) Restriction on copper and tin content.
3) Product analysis.
4) Impact testing .
5) Longitudinal impact testing at -10° C for non-alloy steel grades.
6) Tensile testing at elevated temperature .
7) Selection of leak-tightness test method .
8) Non-Destructive Testing for test category 2 tubes for detection of transverse imperfections.
9) Non-Destructive Testing for test category 2 tubes for detection of laminar imperfections .
10) Special ends preparation.
11) Set of dimensions other than D and T.
12) Exact lengths ).
13) The type of inspection document other than the standard document.
14) Test pressure for hydrostatic leak-tightness test .
15) Wall thickness measurement away from the ends .
16) Non-Destructive Testing method.
17) Additional marking .
18) Protection .
At Tricon Steel & Alloys in Austria, we pride ourselves on manufacturing high-quality EN 10219 S235JRH Carbon Steel Pipes that meet rigorous international standards. Being one of the finest EN 10219 S235JRH Carbon Steel Pipe Manufacturers in Austria, we ensure our pipes are crafted to ensure durability and performance across various applications. These pipes are manufactured in Austria to adhere to standards such as AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME.
Tricon Steel & Alloys offers high-quality EN 10219 S355JOH Steel Pipes designed in Austria to meet diverse industrial applications. As one of the most prominent EN 10219 S355JOH Steel Pipe Manufacturers in Austria, we provide the products with assurance of quality.These pipes in Austria adhere to stringent standards, including AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME. Our seamless pipes range from 4mm to 219mm in diameter with wall thicknesses between 0.5mm and 20mm, while welded pipes are available from 5.0mm to 1219.2mm in size in Austria.
Tricon Steel & Alloys provides high-grade Carbon Steel Pipes in Austria that comply with several international standards, including AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME. As reliable EN 10219 S275JOH Steel Pipe Manufacturers in Austria, we ensure that our pipes are produced from high quality raw materials. Our seamless pipes in Austria range from 4mm to 219mm in diameter, with wall thicknesses between 0.5mm and 20mm. We offer welded pipes in Austria ranging from 5.0mm to 1219.2mm in size and EFW pipes in the same dimensions.
Tricon Steel & Alloys provides EN 10210 S355J2H Steel Pipes that meet stringent international standards such as AISI, DIN, EN, GB, IS, JIS, ASTM, and ASME in Austria. As leading EN 10210 S355J2H Steel Pipe Manufacturers in Austria, we ensure precision in all our products. Our seamless pipes in Austria are available in sizes ranging from 4mm to 219mm with wall thicknesses between 0.5mm and 20mm. The welded pipes in Austria come in dimensions ranging from 5.0mm to 1219.2mm.
At Tricon Steel & Alloys in Austria, we offer top-quality EN 10217-1 P235TR1 steel pipes, ideal for a variety of applications. As one of the finest EN 10217-1 P235TR1 Steel Pipe Manufacturers in Austria, we manufacture our products with the highest quality standards. These pipes in Austria come in various lengths, including 3 meters, 6 meters, 18 meters, 36 meters, and longer. Our EN 10217-1 P235TR1 pipes are manufactured in Austria in compliance with international standards. Available in a range of sizes and diameters, from 1/2 inch to over 4 inches, these pipes are suitable for diverse industrial requirements in Austria.
Tricon Steel & Alloys offers high-quality EN 10216-1 P235TR2 Steel Pipes, manufactured using a seamless process to ensure exceptional strength and durability in Austria. As reliable EN 10216-1 P235TR2 Steel Pipe Manufacturers in Austria, we ensure that these pipes are designed to meet a wide range of industrial applications. Available in Austria in various dimensions, our pipes range from 14mm to 509mm in outer diameter and 2mm to 50mm in wall thickness. These pipes in Austria can be supplied with plain ends, beveled ends, or threaded ends, depending on your specific requirements.
At Tricon Steel & Alloys, we provide high-quality steel pipes, renowned in Austria for their exceptional strength and durability. We take pride in being one of the leading EN 10216-3 P355N Steel Pipe Manufacturers in Austria. These pipes in Austria are available in round shapes with nominal lengths of 3 meters, 6 meters, and 9 meters, or customized as per your requirements. Our EN 10216-3 P355N steel pipes are all new, with single piece lengths ranging from 6 meters to 18 meters, or as specified in Austria .
At Tricon Steel & Alloys in Austria, we offer high-quality EN 10216-2 P265GH steel pipes that meet stringent international standards for seamless pressure service. As one of the leading EN 10216-2 P265GH Steel Pipe Manufacturers in Austria, we offer products that are made frpm high-quality raw materials and are available at competitive prices. We provide in Austria lengths of 5.8m, 11.8m, 12m, or random lengths. The pipes are normalized to ensure superior performance in high-pressure environments in Austria.
Tricon Steel & Alloys specializes in manufacturing S355J2 Carbon Steel Round Bars in Austria that meet the highest quality standards. As leading S355J2 Carbon Steel Round Bar Manufacturers in Austria, we make sure that our round bars are available in various forms including round, hexagonal, flat, half-round, oval, and rectangular shapes, offered in both black and bright finishes. We ensure flexibility with sizes ranging from 22mm up to 800mm, with thickness options spanning 1 to 2 inches in Austria. Each bar in Austria is crafted to precise lengths of 3 meters or 6 meters, catering to diverse industrial requirements.
